Products Warehouse Storage Equipment Dangerous Goods Storage... Indoor Dangerous Good Storage
Liquids and dangerous goods. In the workplace, flammable and combustible liquids are the most common group of hazardous chemicals used in Australia. The most common are petrol, kerosene and diesel fuel. To get information on the classification of flammable and combustible liquids the following should be consulted;
The United Nations Globally Harmonised System of Classification and Labelling of Chemicals. Information can be accessed from Safe Work Australia. The Australian Dangerous Goods Code. This can be accessed from the National Transport Commission. The Storage and handling of flammable and combustible liquids (AS1940) This is Australian Standard AS1940 and is available from Standards Australia. For further and the most up to date information please contact the relevant State health and safety regulator.
Hazardous chemicals are substances, mixtures, or products that can harm one’s health or put someone at risk of injury.
Hazardous chemicals need not be liquids – they can be solids or gases.
Health hazards are properties of a chemical that can cause disease or distress. Some chemicals are carcinogens or known to cause cancer. Toxic chemicals can cause skin irritation, infertility, birth defects, and other major illnesses. This can occur if the chemical is inhaled, touched, or ingested.
Physical hazards refer to a chemical’s ability to injure people on contact or cause damage to property. These chemicals may be flammable, for example. Other chemicals can be corrosive, which eat away at solid materials and through skin. Corrosive chemicals can damage skin and eyes if it makes contact.
Safely and properly storing chemicals of this nature according to storage and handling regulations is crucial for any workplace, even if the workplace does not use chemicals often and doesn’t have large quantities on hand at any given time. A large range of chemical storage cabinets and cupboards are available for sale in Australia.
Flammable or oxidising chemicals, even when not in use, can still pose a risk to workers and visitors. Flammable safety storage cabinets are sold in various sizes and configurations. Compressed gasses can suffocate or poison workers if they leak.
When incompatible chemicals mix, this can cause a chemical reaction. These reactions could cause explosions, fire, release toxic gas, or corrode containers which then go on to mix with other hazardous materials.
Everyone in your workplace needs to know storage and handling regulations:
Not all chemicals are compatible with one another and it isn’t always clear which ones are and which ones aren’t.
Every business should have a Safety Data Sheet about chemicals on hand, and the storage and handling regulations in the workplace. The relevant SDS for chemical storage in Section 7 – Handling and Storage and Section 10 – Stability and Reactivity. Section 7 has a chart showing which chemicals should be separated from one another.
When you are beginning to plan your management of risks around chemicals as well as their storage and handling regulations, you should also consider the location of your chemical storage. Storing flammable liquids or gases near combustible stores such as wood or paper can increase the severity of a fire, for example.
You also need to consider the materials you are storing chemicals in – aluminum containers may react with alkaline (base) solutions.
Storing chemicals near open flames such as welding stations or grinders may cause problems.
Firefighting equipment nearby also needs to be compatible with your stored chemicals. Some types of fire extinguishers may not be suitable for fighting fires of one type of chemical over another.
To properly manage the use of chemicals in your workplace you should develop a rigorous risk management program, including storage and handling regulations.
Risk management is a process of identifying hazards, assessing their risk level and potential for harm, and taking action to control the risks. Your program should also be monitored and regularly reviewed to see how well it is working.
The hazardous chemical SDS is a very useful document in creating a risk management program as it contains a lot of useful and relevant information. A chemical register should also be kept, containing a list of all hazardous chemicals in the workplace and copies of all Safety Data Sheets.
Use the Safety Data Sheet to identify hazards as well as their storage and handling regulations.
The SDS for hazardous chemicals has 16 sections. Section 2 is relevant to identifying hazards as it lists whether a chemical is flammable, toxic or carcinogenic.
Other relevant sections for identifying hazards include Section 5 to check what fire-fighting equipment is required, and Sections 7 (handling and storage) and 10 (stability and reactivity) to determine compatibility between chemicals.
Another thing to consider in identifying hazards is the storage of chemicals with other hazardous materials.
For example, storing a flammable substance with combustible materials such as paper is a hazard as it will increase the risk of fire.
Risk assessment enables you to determine the likelihood and seriousness of harm from the chemical. This in turn helps in deciding what risk control actions to take.
Section 2 of the SDS is relevant here as it divides the chemical hazards into categories depending on their severity (e.g. their level of flammability).
You should also consider the quantities of hazardous chemicals you will be storing as this affects the likelihood of an incident and the severity of a risk. For example, the higher risk usually comes with larger quantities.
There are four levels of risk control, arranged in a hierarchy from most effective to least, as follows:
To reduce the risk of harm you should store your hazardous chemicals away from people and other work areas where possible. To do this you will need to consider the layout and attributes of your workplace according to the relevant storage and handling regulations.
Your chemicals should be stored in suitable containers and away from ignition sources (such as spark from welding) and combustible items (e.g. paper and wood).
Another level 2 measure to consider when choosing storage areas is engineering controls – such as the use of mechanical ventilation and / or refrigeration.
If you need to store chemicals that are not compatible, you will need more than one storage location (see below).
This is a very important control measure as it reduces the risk of reactions and explosions. Here’s a brief guide:
Pallet bunding and IBC bunds are commonly used as secondary containment measures.
Also, see the section below under “Segregation List” for more information.
Regular reviews of your risk control measures allow you to see how well your system is working and to adjust it where necessary.
You should also do reviews of your storage capacity when changes are made (e.g. new types of hazardous chemicals) or when new information on a hazardous chemical in your workplace comes to light.
Reviews can involve various actions. Examples include inspecting barriers and containers for signs of damage or corrosion, providing regular staff training on storing and handling chemicals, and ensuring equipment (e.g. for ventilation and fire-fighting) is in good order.
The checklist below should be helpful for this.
Storage Checklist Disposal
Flower Power partnered with Sitecraft to introduce a Motrec MP240 electric tow tug, configured with a rear bumper 6-hole hitch to integrate directly with their existing trailer fleet.
Flower Power partnered with Sitecraft to introduce a Motrec MP240 electric tow tug, configured with a rear bumper 6-hole hitch to integrate directly with their existing trailer fleet.
A national liquor chain asked the engineering and design team at Sitecraft to provide a solution to assist in the manual handling of large quantities of slabs and cartons of beer and wine.
A national liquor chain asked the engineering and design team at Sitecraft to provide a solution to assist in the manual handling of large quantities of slabs and cartons of beer and wine.
Blacktown City Council needed a simple, reliable way to move people and equipment around their yard — here’s how the Turfman Electric Utility Vehicles made a real difference.
Blacktown City Council needed a simple, reliable way to move people and equipment around their yard — here’s how the Turfman Electric Utility Vehicles made a real difference.
Since its launch in 2017, the NSW Return and Earn scheme has helped reduce litter by 73% and returned over $72 million to charities and community groups via donations or fees .
Since its launch in 2017, the NSW Return and Earn scheme has helped reduce litter by 73% and returned over $72 million to charities and community groups via donations or fees .
Geelong Grammar School is one of the largest private co-educational schools in Australia – with 4 unique campuses across Geelong, Melbourne and regional Victoria.
Geelong Grammar School is one of the largest private co-educational schools in Australia – with 4 unique campuses across Geelong, Melbourne and regional Victoria.
Sitecraft partnered with Smarte Carte to streamline luggage cart collection across ANZ airports. By supplying high-capacity indoor and outdoor tow tugs, Sitecraft helped boost towing efficiency, improve ramp safety, and unify equipment systems, reducing costs and enhancing staff productivity nationwide.
Sitecraft partnered with Smarte Carte to streamline luggage cart collection across ANZ airports. By supplying high-capacity indoor and outdoor tow tugs, Sitecraft helped boost towing efficiency, improve ramp safety, and unify equipment systems, reducing costs and enhancing staff productivity nationwide.